Tripp Lite TV Mount DWM1323SE User Manual

Owner’s Manual  
Tilt Flat Screen  
Wall Mount  
MODEL: DWM1323SE  
CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR  
PROPERTY DAMAGE MAY OCCUR!  
75x75  
100x100  
27”  
15kg  
MAX  
(33lbs)  
MAX  
Русскоязычная версия настоящего руководства представлена на веб-сайте компании  
Copyright © 2013 Tripp Lite. All rights reserved.  
 
13-09-228-9332A6-EN.indd  
1
10/29/2013 12:53:49 PM  
Component Checklist  
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to  
DWM1323SE (x1)  
4mm Allen Key (x1)  
5mm Allen Key (x1)  
Package M  
M4X14 (x4)  
M5X14 (x4)  
Package W  
Anchor Bolt (x4)  
Concrete Anchor (x4)  
3
 
13-09-228-9332A6-EN.indd  
3
10/29/2013 12:53:50 PM  
1a. Mount on Wood Stud Wall  
1
2
Find and mark the  
exact location of  
mounting holes  
3
Drill pilot holes  
Anchor Bolt  
Screw the wall  
mount onto  
the wall  
WARNING  
• Make sure that mounting screws are anchored into the center of the studs.  
Use of a stud finder is highly recommended.  
• Installers are responsible to provide hardware for other types of mounting situations.  
• Installers must verify that the supporting surface will safely support the combined  
load of the equipment and all attached hardware and components.  
4
 
13-09-228-9332A6-EN.indd  
4
10/29/2013 12:53:52 PM  
1b. Mount on Solid Brick and Concrete  
1
Mark the exact  
location of  
mounting holes  
2
Drill pilot holes  
Concrete Anchor  
Anchor Bolt  
Screw the wall  
mount onto  
the wall  
WARNING  
• Installers must verify that the supporting surface will safely support the combined  
load of the equipment and all attached hardware and components.  
5
 
13-09-228-9332A6-EN.indd  
5
10/29/2013 12:53:54 PM  
2. Attach the Display to the VESA Plate  
M4X14  
M5X14  
Lift the display and match the holes on your display with the holes on the mount. Secure your display to  
the mount by tightening screws  
Tighten all screws but do not over tighten.  
3. Adjustment  
5mm Allen Key  
Tighten the adjustment screw by using Allen Key provided to fix the tilting angle  
6
 
13-09-228-9332A6-EN.indd  
6
10/29/2013 12:53:56 PM  
3. Adjustment  
Tension is pre-set at the factory. If too tight or too loose, you may adjust the tension by loosening or tightening  
the head and arm adjustment bolts.  
180°  
180°  
+15°  
-15°  
4mm Allen Key  
Adjust to the desired location or tilt.  
Maintenance  
• Check that the bracket is secure and safe to use at regular intervals(at least every three months).  
7
 
13-09-228-9332A6-EN.indd  
7
10/29/2013 12:53:56 PM  
13-09-228 93-32A6_RevA  
8
 
13-09-228-9332A6-EN.indd  
8
10/29/2013 12:53:59 PM  

TC electronic SDN BHD Guitar NDY 1 User Manual
Tektronix Network Card 80A03 User Manual
Timex Clock Radio T 715 User Manual
Toshiba DVD Player SD 4980SU User Manual
Triax Satellite TV System ST HD527CI User Manual
Tripp Lite TV Cables N001 050 BK User Manual
Uniden Cordless Telephone DCX210 User Manual
Uniden GPS Receiver 1024 User Manual
Viking Cordless Telephone K 1900 User Manual
VTech Video Games TOUCH LEARNING SYSTEM User Manual